电流探头| CT1 The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connect

电流探头| A622 This industrial-style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can be used on digital multimeters, TekMeter, and scopes. The A621 can

电流探头| A621 The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your TekMeter® or oscilloscope*1. A621 2000 Amp AC Current Probe

有源探头| P7240 Selecting the right probe for your application is key to attaining the best signal fidelity in your measurements. Active probes provide truer signal reproduction and fidelity for high-fr

有源探头|TAP3500 可将任意间的两点浮接信号，转换成对地的信号，以供应示波器、电表、或计算机使用,非常多的电路，尤其是电机电路，含有直流抵补（DC OFFSET） 或交流抵补（AC OFFEST）甚至*没有对地回路，此时冒然使用示波器将造成触电，或损坏示波器，或造成电线走火，此时唯有使用差分探头才是的选择。

有源探头| P7225 •Verification, Debug, and Characterization of High-speed Designs •Design, Development, and Compliance Testing •Signal Integrity, Jitter, and Timing Analysis •Manufacturing Engineerin

有源探头| TAP2500 •Verification, Debug, and Characterization of High-speed Designs •Signal Integrity, Jitter, and Timing Analysis •Manufacturing Engineering and Test •Signals with Voltage Swings up

有源探头| TAP1500 •High-speed Digital Systems Design •Component Design and Characterization •Manufacturing Engineering and Test •Educational Research •Signals with Voltage Swings up to 16 Vp-p

有源探头|P6245有源差分探头可将任意间的两点浮接信号，转换成对地的信号，以供应示波器、电表、或计算机使用,非常多的电路，尤其是电机电路，含有直流抵补（DC OFFSET） 或交流抵补（AC OFFEST）甚至*没有对地回路，此时冒然使用示波器将造成触电，或损坏示波器，或造成电线走火，此时唯有使用差分探头才是的选择。

有源探头| P6205 The P6205 probe is part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA （Communications Signal Analyzers）, DSA （Digitizing Signal Analyzers）, 11000 Series and